top of page
Search
  • Todd

Corner Clamps For Woodworking

Woodworking is a craft that requires the use of many tools. One tool that can come in handy for any woodworker is the corner clamp.

Corner clamps are designed to hold two pieces of wood together at 90-degree angles, making it easier to join them together and create accurate joints.

They are especially useful when working with mitered corners or other complex joints where accuracy is essential.


In this blog post, we will take a closer look at what corner clamps are and how they can be used in woodworking projects.

We’ll also discuss some tips on choosing the right type of corner clamp for your needs and provide some advice on using them effectively. So let’s get started!


Choosing The Right Corner Clamps


When it comes to corner clamps, there are several types available on the market. The most common type is the parallel jaw clamp, which uses two opposing jaws held together by a screw or lever.

This type of clamp provides even pressure when joining pieces at 90-degree angles and is great for creating mitered corners and other complex joints. However, these clamps can be difficult to adjust and may require additional tools for setup.



Another type of corner clamp is the swivel jaw clamp. These clamps are a bit easier to use as they feature two adjustable jaws that rotate independently, allowing you to create accurate joints at any angle up to 90 degrees. This type of clamp can be especially useful when constructing frames or other projects that require precise angles.



When choosing a corner clamp, it’s important to consider the size and weight of the material you will be using. Larger clamps are better suited for heavy-duty applications, while smaller clamps may work best for lighter materials.


How do you clamp corners on wood?


When clamping corners on wood, the process is relatively straightforward.


Begin by measuring the corner you’re looking to clamp and making sure that all pieces are cut to the same size. To ensure accuracy, use a miter saw if available.


Once all of your pieces are cut, lay them out in an ‘L’ shape and hold them together with a clamp. Adjust the clamp until you achieve an even, tight corner.


Once your pieces are clamped securely together, use a drill to secure each joint with screws or nails as needed.


Finally, apply wood glue to ensure that the pieces remain firmly attached once the clamp is removed. After letting it dry for 24 hours, your corner will be clamped securely and ready to use.






When clamping corners on wood, it is important to use the right tools for the job. Clamps should be strong enough to hold the pieces together firmly, but not so tight that they cause undue stress or damage.


Which clamps are best for woodworking?


When it comes to woodworking, the type of clamp you choose will largely depend on the project. Generally speaking, C-clamps are best suited for smaller tasks such as gluing a miter joint or laminating small pieces of wood.





Bar clamps, also known as F-clamps, can be used for larger projects like clamping heavier pieces together or setting up temporary jigs.





For the absolute strongest bond, an adjustable quick-release toggle clamp is best. These clamps feature a specialized mechanism that allows for extremely tight tension and fast adjustments.



26 views0 comments

Recent Posts

See All
bottom of page